Panasonic DP-3510 - Page 210

210
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
5.1.3. F4 Mode: Input/Output Status Test
Set the machine to service mode and press "4" key on the Keypad.
↓
Press the "START" key.
↓
Enter the number to activate the test then press "START" key.
↓
Press "STOP" key to cancel the test.
↓
When the "C (CLEAR)" key is touched, the selected code input will not be accepted.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
1. Input Check
F4 Mode (Input Check)
No. Function Condition
Message Display
Remarks
76543210
000 Paper Path Sensor Paper is detected. 0
Intermediate Roller Sensor Paper is detected. 0
Fuser Unit Paper Exit
Sensor
Paper is detected. 0
Inverting Exit Sensor Paper is detected. 0
Timing Sensor Paper is detected. 0
Registration Sensor Paper is detected. 0
001 Size Sensor 3
(Sheet Bypass)
Sensor is activated. 1
Size Sensor 2
(Sheet Bypass, Inside)
Sensor is activated. 1
Size Sensor 1
(Sheet Bypass, Outside)
Sensor is activated. 1
NP Sensor
(Sheet Bypass)
Paper is detected. 1
ADU Exit Sensor Paper is detected. 0
ADU Intermediate Sensor Paper is detected. 0
ADU Paper Feed Sensor Paper is detected. 0