Panasonic DP-3510

231
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
5.1.6. F7 Mode: Electronic Counter
Set the machine to Service Mode and press "7" key on the Keypad.
↓
Press the "START" key.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another code number, scroll the menu with the arrow buttons.
↓
Select the desired function on the Touch Panel display and touch the "OK" button.
↓
When the "C (CLEAR)" key is touched, the selected code input will not be accepted.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
F7 Mode
Service
Mode
Item Remarks
F7 Electronic
Counters
00 List Print
01 Key Operator ID Code Key Operator’s identification code for
access to the counter mode.
02 Maintenance
Count
00 Total Count Total count for all copies / prints.
01 PM Count Preventive Maintenance count.
02 Scanner PM Count PM count for scanner readings.
03 ADF Count PM count of originals fed through the
ADF.
04 Not Used
05 OPC Drum Count PM count of recording paper fed
through the OPC Drum.
06 Process Unit Count PM count of recording paper fed
through the Process Unit.
07 ADF PM Count PM count of recording paper fed
through the Automatic Duplex Unit.
08 Fuser Web Count PM Count for Fuser Web.
09 Developer Count PM Count for Developer.
10 Corona Cleaning
Count
Count for Corona Cleaner.
11 Avg. Print/Drum Rise
Up
Average Print Count for OPC Drum.
12 Total OPC Rotation
Time
Rotation Time for OPC Drum.
13 Avg. Min / Drum Rise
Up
Average Rotation Time for OPC Drum.