230
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
70-74 Not Used
75
Adj. read AD enable
(Factory use only)
Adjustment of read timing. -2 - +2
76 Adj. read LSI sampling
(Factory use only)
Adjustment of read timing. 0 - +3
77 Adj. read LVDS clock
(Factory use only)
Adjustment of read timing. 0 - +3
78 Paper Loop (Tray4, SYS) Individual Fine Adjustment for Tray 4 -99 - +99
79 MTF (Modulation Transfer
Function) adjustment
Adjustment of Scanning Sharpness by digital
image processing for Text /Photo Copy Mode.
-2 - +2
80 QUANTUM Exposure Volt. Set by Digital QUANTUM (QUARC) control -56 - +25
81 QUANTUM Bias Volt.DC Set by Digital QUANTUM (QUARC) control -77 - +76
3.92V
82 QUANTUM Charge Voltage Set by Digital QUANTUM (QUARC) control -92 - +61
3.27V
83 Temperature sensor Value Value of Temperature sensor. 0 - 255
84 Humidity sensor value Value of Humidity sensor. 0 - 255
85 (Factory use only)
86 ADF reverse stop position Adjustment of ADF reverse stop position. -99 - +99
0.3mm
87 ADF exhaust stop position Adjustment of ADF exit stop position -99 - +99
0.3mm
88 ADF feed regist. 1-sided Adjustment of ADF pick up for 1-sided. -99 - +99
0.3mm
89 ADF feed regist. 2-sided Adjustment of ADF pick up for 2-sided. -99 - +99
0.3mm
90 ADF read position Main scan Adjustment of ADF horizontal image read
start position.
-99 - +99
0.05mm
91 Original read edge ADF Adjustment of original detection timing. -99 - +99
0.3mm
92 Original trail ADF Adjustment of trail edge detection timing. -127 - 127
0.3mm
93 ADF 100% image. 1-sided Adjustment of magnification for 1-sided. -9 - +9
0.1%
94 ADF 100% image. 2-sided Adjustment of magnification for 2-sided. -9 - +9
0.1%
95 Exposure Voltage Adjustment of LSU Laser Power.
(QUANTUM is OFF)
-56 - +25
96 Charge Voltage Adjustment of Charge Voltage.
(QUANTUM is OFF)
-95 - +61
3.27V
97 Bias Volt.DC Adjustment of Bias Voltage.
(QUANTUM is OFF)
-77 - +76
3.92V
98 Paper Loop (LCT) Individual Fine Adjustment for LCT. -99 - +99
99 F5/F6 initialization Initialize F5/F6 parameter settings.
F6 Mode
No. Item Remarks
Setting
Range
To Next Page
Loading...
