Panasonic DP-3510 - Page 229

229
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
41 Paper Loop (Bypass) Individual Fine Adjustment for Sheet Bypass -99 - +99
42 Paper Loop (Tray 2, cop) Individual Fine Adjustment for Tray 2 -99 - +99
43 Paper loop (2-sided) Adjustment for the length of the loop formed
before the copier timing roller.
-99 - +99
44 Laser duty adj. FAX -99 - +99
45 Paper feeding. LCT Adjustment of LCT paper feed. -50 - +50
46 Laser duty adj. PRINTER -99 - +99
47 T corona current 2-sided Adjustment of transfer corona current. -10 - +10
5.22uA
48 QUANTUM TDC adjust Adjustment of QUANTUM TDC -3 - +3
49 T mode image density Image density adjustment for Text mode.
(-) : Darker.
(+) : Lighter.
-99 - +99
50 T/P mode image density Image density adjustment for Text/ Photo
mode.
(-) : Darker.
(+) : Lighter.
-99 - +99
51 P mode image density Image density adjustment for Photo mode.
(-) : Darker.
(+) : Lighter.
-99 - +99
52 LSU unit PWM adjust 1 Adjustment of PWM value of LSU. -99 - +99
53 CCD read position adj. Adjustment of CCD read position. -42 - +44
0.2mm
54 T mode contrast -127 - +127
55 T/P mode contrast -127 - +127
56 P mode contrast -127 - +127
57 Sep. DC Volt. 1-Sided Compensation of Detach DC voltage for 1
sided copy.
-20 - +30
10V
58 Sep. AC Volt. 1-Sided Compensation of Detach AC voltage for 1
sided copy.
-6 - +8
100V
59 Sep. DC Volt. 2-Sided Compensation of Detach DC voltage for 2
sided copy.
-20 - +30
10V
60 Sep. AC Volt. 2-Sided Compensation of Detach AC voltage for 2
sided copy.
-6 - +8
100V
61 Continuous print TDC 0 - +8
62 TDC gain voltage adjust Adjustment of toner density sensor gain
voltage.
-10 - +10
0.033V
63 Lead edge read point 0 - +9
0.5mm
64 Side edge read point 0 - +9
0.5mm
65 Bk density reference Reference voltage for Toner Density Sensor. -127 - +127
66 Bk density output Compensate value for Toner Density Sensor
output.
-127 - +127
67 ADF image density Compensation of ADF image density. -99 - +99
68 Paper Loop (Tray 3, SYS) Individual Fine Adjustment for Tray 3 -99 - +99
69 Stamp position adjust Adjustment of verification stamp position. -50 - +50
0.3mm
F6 Mode
No. Item Remarks
Setting
Range