Panasonic DP-3510

233
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
5.1.7. F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.
↓
Press the "START" key.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another code number, scroll the menu with the arrow buttons.
↓
Select the desired function on the Touch Panel display and touch the "OK" button.
↓
When the "C (CLEAR)" key is touched, the selected code input will not be accepted.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
F8 Mode
No. Item Remarks
00 Exposure Lamp replacement When replacing the exposure lamp.
Procedure:
a) Press the Start key to move the exposure lamp to
the position (approx. 250 mm from the optics
home position) where it can be replaced.
b) To return the optical system to the home position,
press the CLEAR key.*
01-05 Not Used
06 Error Log Print/View a) Each time the arrow button is pressed, the
machine errors or paper jam codes stored in
memory are displayed, beginning with the oldest
code.
Note:
Only the 30 most recent codes are displayed.
07 Error Log Clear a) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
08 (Factory use only) Lock operation for Scanner Unit.
09 Toner Density adjustment Adjustment operation of Toner Density.
10 Drum Charge adjustment Adjustment operation of Drum Charge.
11-12 Not Used
13 (Factory use only) Adjustment operation of Black Density sensor.
14 Black Density gain Adjustment operation of Black Density sensor gain.
15 QUANTUM Pattern Print out the QUANTUM Test Pattern.
16 Not Used
17 LSU PWM Pattern 1
(Factory use only)
Print out the Test Pattern 1.
18 LSU PWM Pattern 2
(Factory use only)
Print out the Test Pattern 2.