234
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
19 Move mirror to lock a) Press the Start key to move the mirror unit to the
locked position for transporting the copier.
b) When the mirror unit is locked, the machine will
not accept any numerical key input.
Note:
The locking operation is automatically reset when
the Power switch is turned ON again.
20 TDC sensor output adj. Adjustment of TDC sensor.
21 Not Used
22 LSU PWM Pattern 3
(Factory use only)
Print out the Test Pattern 3.
23 LSU PWM Pattern 4
(Factory use only)
Print out the Test Pattern 4.
24-46 Not Used
47 ADF continuous test Press START key to begin.
48 Platen cont. Test Press START key to begin.
49-54 Not Used
F8 Mode
No. Item Remarks