Panasonic DP-3510

400
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(3) Place the Finisher on the Slider of the Stand, and
loosely secure it with 2 Screws (M4 x 6).
Caution:
When mounting the Finisher in place, be sure to
insert the lower tabs of the Finisher into the holes
on top of the Slider. Ensure that there is no gap
between the Finisher and the Stand. The gap
would indicate the Finisher is overlapping.
Remove and mount the Finisher correctly.
(4) Align the positioning lines of the Finisher and the
Stand by moving the Finisher back and forth, and
tighten 2 Screws when they are aligned.
Finisher
Slider
Screws
No Gap
Finisher
Stand
Finisher
Screws
Positioning
Line