401
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(5) Place the Bracket in its original position, then
secure it with Screws. Slide the Finisher toward
the Host Machine and connect it to the Host
Machine.
(6) Attach the Label as illustrated.
(7) Attach the Delivery Tray with Screws (M4 x 6) as
illustrated.
(8) Open the Front Cover of the Finisher, then insert
the Stapler along the Guide Rails.
(9) Close the Front Cover of the Finisher.
(10) Connect the Finisher to the Host Machine with
the Interface Cable.
Caution:
Before connecting the Interface Cable, make sure
to turn OFF the Host Machine and unplug the AC
Power Cord from the wall outlet to avoid shock
hazards.
Finisher
Bracket
Screw
(6)
Finisher
Delivery Tray
Screws
Screws
Front Cover
Stapler
(10)
To Next Page
Loading...
