Panasonic DP-3510

410
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(13) Slowly move the Finisher close to the Host
Machine and adjust the Finisher back and forth
so that the notch of the Latch Plate aligns with
the protrusion of the Punch Base Cover.
(14) Attach the Finisher to the Host Machine and
connect the Interface Cable of the Finisher to the
Host Machine.
(15) Plug the AC Power Cord into the wall outlet and
turn the Main Power Switch on the Back and the
Power Switch on the Left Side of the machine to
the ON position.
Host Machine
Latch Plate
Punch Base
Cover
Align
Finisher