Panasonic DP-3510

416
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(14) Pull out the 1st Paper Tray.
(15) Remove 2 Screws.
(16) Remove the LVPS Cover.
(17) Turn the Lifting Lever counter-clockwise.
(18) Pull the ADU Unit out.
(19) Remove 2 Screws.
(20) Disconnect the Cooling Fan 1 Harness and
remove the Interlock Cover.
(21) Disconnect the HT Harness.
(22) Remove 7 Screws.
(23) Remove the Lower Control Panel Cover.
(24) Turn the Control Panel Unit upside down.
(25) Secure the DF2 Harness to the existing
2 Harness Clamps.
Note:
Route the right side of the harness over the center
bracket as illustrated.
(26) Connect the DF2 Harness to DHT Harness.
(14)
(16)
(18)
(15)
(17)
(19)
(20)
(21)
(24)
(22)
(23)
(22)
(22)
(25)
(25)
(26)