Panasonic DP-3510

417
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(27) Insert the right side of the DF2 Harness into the
Connector Holder Bracket.
(28) Secure the Connector Holder Bracket with
1 Screw.
(29) Connect the Heater to DF2 Harness.
(30) Carefully move the Scanner towards the center
to give you access to the screw hole.
(31) Secure the Heater with 1 Screw.
(32) Insert the left side of the DF2 Harness into the
Connector Holder Bracket.
Note:
Observe the direction of the bracket in the
illustration, before inserting the connector.
(33) Secure the Connector Holder Bracket with
1 Screw.
(34) Connect the Heater to DF2 Harness.
(35) Secure the Heater with 1 Screw.
(36) Secure the Harness with 1 Harness Clamp.
(27)
(28)
(Right Side)
(29)
(31)
(32)
(33)
(Left Side)
(35)
(36)
(34)