419
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(45) Remove 2 Screws.
(46) Remove the Exit Cover 3.
<If the System Console option is installed,
perform steps (45) ~ (46) below>
(47) Remove 3 Screws.
(48) Remove the Left Cover.
(49) Remove 4 Screws.
(50) Open the Upper Exit Cover.
(51) Remove the Paper Exit Assembly.
Note:
Exercise care not to damage the Inverting Paper
Sensor.
(52) Close the Upper Exit Cover.
(53) Remove 5 Screws.
(54) Remove the Exit Guide.
(55) Remove 2 Screws.
(56) Partially slide out the EL Bracket Assembly.
(45)
(47)
(48)
(46)
(49)
(49)
(50)
Inverting
Paper
Sensor
(51)
(53)
(53)
(54)
(55)
(56)
To Next Page
Loading...
