Panasonic DP-3510

420
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(57) Install the RLB PC Board.
(58) Secure the RLB PC Board with 4 Screws.
(59) Connect the RLB Harness to the RLB PC Board
(CN171 and CN172).
(60) Connect the DHT Harness to the RLB PC Board
(CN173).
(61) Slide the EL Bracket Assembly into the machine.
(62) Secure the EL Bracket Assembly with 2 Screws.
(63) Secure the RLB Harness with 4 Harness
Clamps.
(64) Route the RLB Harness through the hole in the
frame as illustrated.
(65) Remove 6 Screws.
(66) Remove the Lower Rear Cover.
<If the System Console option is installed,
perform steps (61) ~ (62) below>
(67) Remove 2 Screws.
(68) Remove the Rear Cover of System Console.
(59)
(57)
(58)
(58)
(60)
(60)
(62)
(61)
(63)
(64)
(65)
(65)
(67)
(66)
(68)