Panasonic DP-3510

422
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(76) Install the Heater Switch Assembly.
(77) Secure the Heater Switch Assembly with
1 Screw.
(78) Secure the Harness with 2 Harness Clamps.
(79) Remove 1 Screw.
(80) Remove the Blind Plate.
(81) Affix the Heater SW Label as illustrated.
(82) Proceed with the installation of other options.
If finished, reassemble the machine and
reinstall all Covers.
(83) Plug the AC Power Cord into the wall outlet and
turn the Main Power Switch on the Back and the
Power Switch on the Left Side of the machine to
the ON position.
(76)
(77)
(78)
(78)
(79)
(80)
(81)