Panasonic DP-3510

51
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
<Turn the Inverter PC Board Case upside down>
(8) Disconnect 2 Harnesses on the Inverter PC
Board (1209).
(9) Remove 2 Screws (F10).
(10) Remove the Inverter PC Board (1209).
(11) Remove the Scanning Lamp (1228).
Note:
Ensure that the Scanning Lamp Harness is
reinstalled properly as illustrated.