52
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(12) Remove 5 Screws (21).
(13) Remove the CCD Cover (1213).
(14) Disconnect 2 Harnesses on the CCD PC Board
(CN850 and CN851).
Important:
Before proceeding, make a note of the position of
the alignment pointer. If the CCD is not reinstalled
at the same position, it will affect the copy quality.
(15) Remove 2 Screws (1M).
(16) Remove the CCD Unit (1234).
To Next Page
Loading...
