577
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
b. B4 Stack
Note:
The illustration shows two Sensors checking for jams. Single detection, however, uses only one
sensor.
Fig. 3-052
c. LTR-R / A4-R Stack
Note:
The illustration shows two Sensors checking for jams. Single detection, however, uses only one
sensor.
Fig. 3-053
4. Delivery Delay Jam (92H)
a. By Delivery Sensor
The Delivery Sensor (PI11S) does not turn ON within a specific period of time after the Paper
Pushing Plate Top Position Sensor has turned ON.
Fig. 3-054
No. 1 Paper Sensor
(PI18S)
No. 2 Paper Sensor
(PI19S)
Feed Motor (M1S)
T : feeding of (paper length x 1.5) mm
T
T
No. 1 Paper Sensor
(PI18S)
No. 2 Paper Sensor
(PI19S)
Feed Motor (M1S)
T : feeding of (paper length x 1.5) mm
T
T
Normal
Normal
Jam
Jam
Load stops
No. 1 Paper Sensor
(PI18S)
No. 2 Paper Sensor
(PI19S)
No. 3 Paper Sensor
(PI20S)
No. 3 Paper Sensor
(PI20S)
Feed Motor (M1S)
T : feeding of (paper length x 1.5) mm
T
T
T
No. 1 Paper Sensor
(PI18S)
No. 2 Paper Sensor
(PI19S)
Feed Motor (M1S)
T : feeding of (paper length x 1.5) mm
T
T
T
Normal
Normal
Normal
Jam
Jam
Jam
Load stops
Paper Pushing Plate Top
Position Sensor (PI15S)
Delivery Sensor
(PI11S)
Paper Folding Motor
(M2S)
T : Equivalent of 180 mm
T
Normal
Paper Pushing Plate Top
Position Sensor (PI15S)
Delivery Sensor
(PI11S)
Paper Folding Motor
(M2S)
T : Equivalent of 180 mm
T
Jam
Load stops