Panasonic DP-3510

576
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2. Inlet Delay Jam (91H)
The No. 1 Paper Sensor (PI18S) on the Paper Sensor PCB does not turn ON for a specific period of
time after the Inlet Sensor (PI1) of the Finisher turned ON.
Fig. 3-050
3. Inlet Stationary Jam (A1H)
The No. 1 Paper Sensor (PI18S), No. 2 Paper Sensor (PI19S), and No. 3 Paper Sensor (PI20S) on the
Paper Sensor PCB do not turn OFF when the stack has been fed for a specific period after the No. 1
Paper Sensor (PI18S) turns ON. The Paper Sensor used varies according to the paper size.
a. Ledger / 11 x 17 in (A3 / 279 x 432 mm) Stack
Fig. 3-051
T
Inlet Sensor (PI1)
No. 1 Paper Sensor
(PI18S)
Feed Motor (M1S)
T :
100 (mm)
Delivery speed (mm/sec)
T
Inlet Sensor (PI1)
No. 1 Paper Sensor
(PI18S)
Feed Motor (M1S)
T :
100 (mm)
Delivery speed (mm/sec)
Jam
Load stops
No. 1 Paper Sensor
(PI18S)
Feed Motor (M1S)
T
Normal
T : feeding of (paper length x 1.5) mm
No. 1 Paper Sensor
(PI18S)
Feed Motor (M1S)
T
T : feeding of (paper length x 1.5) mm
Jam
Load stops