600
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 5-021
Caution:
Before re-attaching the Feed Drive Unit back on
the Finisher Unit, loosen the Move Gear Stop
Screw [11] to relieve the tension, and then fasten
the Screw after attaching the Feed Drive Unit.
The Move Gear Attachment must be adjusted
when removing and attaching the Swing Unit.
If you forget to fasten the Screw, the Gear Teeth
may disengage, resulting in defective feed.
[11]
To Next Page
Loading...
