Panasonic DP-3510

664
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
E7-48 • Swing Motor (M7)
• Swing Guide Closed Detection Switch
2 (MS6)
• The swing guide closed detection switch does not
turn ON even after the swing motor has rotated
counter-clockwise for 1 sec.
• Swing Motor (M7)
• Swing Guide Open Detecting Sensor
(PI18)
• The swing guide open detection sensor does not
turn ON even after the swing motor has rotated
clockwise for 1 sec.
• Safety Range Switch (MS3)
• Swing Guide Closed Detection Switch
2 (MS6)
• The swing guide closed detection switch is OFF
when the tray 1/2 is at the safety range switch OFF
position.
• Swing Motor (M7)
• Swing Motor Clock Sensor (PI20)
• The clock pulse is discontinued for 200 ms during
swing operation.
E7-27 • Tray Lift Motor (M5)
• Tray Lift Motor Clock Sensor 1/2 (PI9 /
PI19)
• Tray Home Position Sensor (PI8)
• The movement does not end within 15 sec after the
tray lift motor is driven.
• The tray home position can not be detected after the
tray lift motor has been driven for 15 sec.
• Tray Upper Limit Detection Switch
(MS5)
• The tray upper limit detection switch is ON while the
tray is moving up.
• Tray Lift Motor (M5)
• Tray Lift Motor Clock Sensor 1/2 (PI9 /
PI19)
• Clock pulses from the clock sensor 1/2 are not
obtained for 200 ms after the tray lift motor has been
driven.
E7-20 • Second Feed Motor (M8)
• Shutter Closed Detection Switch (MS4)
• The shutter closed detection switch does not turn
ON after the second feed motor has rotated counter-
clockwise for 1 sec or more.
• Second Feed Motor (M8)
• Shutter Open Sensor (PI5)
• The shutter open sensor does not turn ON after the
second feed motor has rotated counter-clockwise for
1 sec or more.
• Safety Range Detection Switch (MS3)
• Shutter Closed Detection Switch (MS4)
• The shutter closed detection switch is OFF when the
tray 1/2 is at the safety range switch OFF position
during operation of the tray lift motor.
Error
Code
Error Type Description