Panasonic DP-3510

665
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.1.7.4.2. Saddle Stitch Unit
Error
Code
Error Type Description
E7-41 • Paper Positioning Plate Motor (M4S)
• Paper Positioning Plate Home Position
Sensor (PI7S)
• The paper positioning plate home position sensor
does not turn ON even after the paper positioning
plate motor has been driven for 1.33 sec or more.
• The paper positioning plate home position sensor
does not turn OFF even after the paper positioning
plate motor has been driven for 1 sec or more.
E7-42 • Paper Folding Motor (M2S)
• Paper Folding Motor Clock Sensor
(PI4S)
• The number of detecting pulses from the paper
folding motor clock sensor drops below a specific
value.
• Paper Folding Motor (M2S)
• Paper Folding Home Position Sensor
(PI21S)
• The state of the paper folding home position sensor
does not change even after the paper folding motor
has driven for 3 sec.
E7-43 • Guide Motor (M3S)
• Guide Home Position Sensor (PI13S)
• The guide home position sensor does not turn ON
even after the guide motor has been driven for 0.455
sec or more.
• The guide home position sensor does not turn OFF
even after the guide motor has been driven for 1 sec
or more.
E7-44 • Alignment Motor (M5S)
• Alignment Plate Home Position Sensor
(PI5S)
• The alignment plate home position sensor does not
turn ON even when the alignment motor has been
driven for 0.5 sec or more. (During initial operation,
the motor is driven for 1.67 sec.)
• The alignment plate home position sensor does not
turn OFF even when the alignment motor has been
driven for 1 sec or more.
E7-45 • Stitcher Motor (rear, M6S)
• Stitching Home Position Sensor (rear,
MS5S)
• The stitching home position sensor does not turn
OFF even when the stitcher motor (rear) has been
rotated clockwise for 0.5 sec or more.
• The stitching home position sensor does not turn
ON even when the stitcher motor (rear) has been
rotated counter-clockwise for 0.5 sec or more.
E7-46 • Stitcher Motor (front, M7S)
• Stitching Home Position Sensor (front,
MS7S)
• The stitching home position sensor does not turn
OFF even when the stitcher motor (front) has been
rotated clockwise for 0.5 sec or more.
• The stitching home position sensor does not turn
ON even when the stitcher motor (front) has been
rotated counter-clockwise for 0.5 sec or more.