Panasonic KX-HDV430

4.9 Changing the System Settings
Note
• The feature depends on your phone system. Contact your administrator for further information.
To select the main item
1. In standby mode, tap
or , and then select "System Settings".
2. Tap or , and then select the main item.
Main item Sub Item
Status Line Status, Firmware Version, IP Mode, IPv4 Settings, IPv6 Settings, MAC
Address, LLDP, CDP, VLAN
Network Settings IP Mode Select, IPv4 Settings, IPv6 Settings, LLDP, CDP, VLAN, Link Speed,
Embedded Web, Network Test
System Settings Set Time & Date, Authentication, Access Code, ECO Mode, Restart, DSS
Restart
4.9.1 System Settings Menu Layout
Status
Sub Item Description Status
Line Status
For KX-HDV330:
Line 1–Line 12
For KX-HDV430:
Line 1–Line 16
Displays the line status. Registered / Registering / (NULL)
Firmware Version Displays the firmware version of the
telephone.
—
IP Mode Displays the IP network mode. IPv4 / IPv6 / IPv4&IPv6
IPv4 Settings Displays information about IPv4
settings.
IP Address
*1
Subnet Mask
*1
Default Gateway
*1
DNS 1
*1
DNS 2
*1
IPv6 Settings Displays information about IPv6
settings.
IP Address
*2
Prefix
*3
Default Gateway
*2
DNS 1
*2
DNS 2
*2
MAC Address Displays the MAC address of the
telephone.
—
LLDP Displays the LLDP status. On / Off
CDP Displays the CDP status. On / Off
4.9 Changing the System Settings
Document Version: 2017-08 Operating Instructions 111