Panasonic KX-HDV430

3.10.6 Automatic Mode
You can set up Automatic Mode.
Note
• Depending on the Network Camera, this feature may not be available.
Auto Pan
The Network Camera can be set to pan horizontally (left–right) repeatedly over its entire viewing range.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press
/ MENU .
2. Tap "Camera Settings".
3. Tap "Auto Mode".
4. Tap "Auto Pan", and then tap "OK".
*1
*1
To cancel Automatic Mode, tap "Off", and then tap "OK".
Preset Sequence
You can have the Network Camera display multiple preset viewing positions in a repeating cycle.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press
/ MENU .
2. Tap "Camera Settings".
3. Tap "Auto Mode".
4. Tap "Preset Sequence", and then tap "OK".
*1
*1
To cancel Automatic Mode, tap "Off", and then tap "OK".
Automatic Tracking
You can have the camera automatically follow a moving object.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press / MENU .
2. Tap "Camera Settings".
3. Tap "Auto Mode".
4. Tap "Auto Tracking", and then tap "OK".
*1
*1
To cancel Automatic Mode, tap "Off", and then tap "OK".
3.10.7 Receiving Alarms from Network Cameras
When an alarm from a Network Camera (movement detection, error, abnormality, etc.) is detected, this unit
can display the video feed from the camera that issued the alarm.
Note
• Alarms can be indicated by a sound and/or a pop-up message on the display.
• Depending on the Network Camera, this feature may not be available.
3.10.6 Automatic Mode
86 Operating Instructions Document Version: 2017-08