Panasonic KX-HDV430

4.10 Changing the Advanced Settings
To select the main item
1. In standby mode, tap or , and then select "Advanced Settings".
2. Tap or , and then select the main item.
Main Item Sub Item
Xsi Setting —
UC Setting —
Call Settings Block Anonymous, Anonymous Call, Block Caller ID, Anywhere, Remote Office,
SimultaneousRing, System Lock
Executive Filtering —
Assistant Settings Assistant Filtering, Divert Setting
4.10.1 Advanced Settings Menu Layout
Xsi Setting
Sub Item Description Setting Default
Xsi Setting
*1
Specifies the ID and
password for the Xsi
service.
For KX-HDV330:
Line 1–Line 12
For KX-HDV430:
Line 1–Line 16
ID
*2
Password
*2
Not stored
*1
This item is displayed only when the feature is enabled. Contact your administrator for further information.
*2
Max. 128 characters
UC Setting
Sub Item Description Setting Default
UC Setting
*1
Specifies the ID and password for the
Broadsoft UC service (IM&P).
ID
*2
Password
*2
Not stored
*1
This item is displayed only when the feature is enabled. Contact your administrator for further information.
*2
Max. 128 characters
Call Settings
Sub Item Description Setting Default
Block Anonymous Specifies whether or not
to block incoming
anonymous calls.
For KX-HDV330:
Line 1–Line 12
For KX-HDV430:
Line 1–Line 16
On / Off Off
Anonymous Call
*1
Specifies whether or not
to make outgoing
anonymous calls.
For KX-HDV330:
Line 1–Line 12
For KX-HDV430:
Line 1–Line 16
On / Off Off
4.10 Changing the Advanced Settings
116 Operating Instructions Document Version: 2017-08