Panasonic KX-HDV430

System Settings
Sub Item Description Setting Default
Set Time & Date
*1
Specifies the time and
date of the telephone.
Date
Time
—
Authentication
*2
Specifies the ID and
password for HTTP
authentication.
ID
*3
Password
*3
Not stored
Access Code
*4
Specifies the access
code to access the
redirect server.
Max. 16 characters Not stored
ECO Mode
*2
Selects whether to
enable ECO mode.
On / Off Off
Restart Restart the unit. Yes / No No
DSS Restart Restart any connected
DSS units.
Yes / No No
*1
Availability depends on your phone system. When the power supply is cut off due to a power outage or other reasons or after the
unit is restarted, a reconfiguration will be necessary as the current setting values are deleted. Therefore, it is recommended to use
the NTP server. Contact your administrator for further information.
*2
The administrator password may be required for this setting. Contact your administrator for further information. For available
characters, see “5.2 Character Table for Administrator Password".
*3
Max. 128 characters
*4
This setting may not be displayed depending on the settings of this unit. Contact your administrator for further information.
4.9.1 System Settings Menu Layout
Document Version: 2017-08 Operating Instructions 115