2.4.5 Switching the Display by Pressing / HOME
Switching the display of the standby screen
While the phone is in standby mode, you can cycle through the available standby screens by pressing
/ HOME . The most recently displayed screen serves as the standby screen.
Normal display 1
Displays the menu and the current date
and time
Normal display 2
Displays the menu and function keys 1
to 4
Combined display
*1
Displays the status of each line and the
function keys (6 keys/page x 4 pages)
Line display
*1
Displays the status of each line
*1
This screen can be displayed from other screens, in addition to the standby screen.
Menu
Function key display
Line status display
Soft keys (display the names of available features)
Function key page switching and status display
Tapping cycles through the function key pages. This area also displays the status of each page in order
from the left: page 1 (function keys 1–6), page 2 (function keys 7–12), page 3 (function keys 13– 18),
and page 4 (function keys 19–24).
: Indicates the currently displayed page
: Indicates pages that are not currently displayed
: Indicates pages not currently displayed where there is a call arriving at a BLF key
: Press / HOME .
2.4.5 Switching the Display by Pressing / HOME
Document Version: 2017-08 Operating Instructions 43
To Next Page
Loading...
