Note
• Example images of the display in this manual are samples only, and the actual screen on your phone
may vary in language and/or appearance.
Switching the display of the incoming call, active call, and conference screens
While receiving a call, during a call, or during a conference, you can switch the display by pressing
/ HOME . The screen you switch to differs depending on the current standby display.
Pressing / HOME again returns you to the original display.
Current standby display
Display when you press / HOME
*1
Normal display 1 Line display
Lines receiving a call or on a call are highlighted. (Lines with
multiple incoming calls show the first call.) is displayed on
lines that are in a conference.
Normal display 2
Line display
Combined display Combined display
Lines receiving a call or on a call are highlighted. (Lines with
multiple incoming calls show the first call.) is displayed on
lines that are in a conference.
*1
See “Switching the display of the standby screen”.
Content of the Line Display Screen and the Combined Display Screen
You can confirm the status of and information about each line. By tapping certain icons, you can view more
detailed information or change settings. Also, you can execute functions or make settings by tapping the soft
keys at the bottom of the display.
The figure below is an example of the line display. On the combined display, function keys are displayed
along the top.
Note
• Example images of the display in this manual are samples only, and the actual screen on your phone
may vary in language and/or appearance.
Line status
Icon
Status
Meaning
Color Light pattern
— Off Available line
Blue On On a call
2.4.5 Switching the Display by Pressing / HOME
44 Operating Instructions Document Version: 2017-08
To Next Page
Loading...
