• Linked Numbers
Enter the names and phone numbers to associate with the Network Camera so that the video feed
automatically displays when making or receiving a call. You can make up to 5 entries (name: max. 24
characters, phone number: max. 32 characters).
– To select a number from the phone book: Tap .
– To select a number from the call history: Tap .
• Stream
Select "Stream 1" or "Stream 2" if the Network Camera is configured to output multiple streams. For
details, refer to your Network Camera's documentation.
3.10.2 Network Camera Viewer
Starting Network Camera Viewer
1. In standby mode, tap
or , and then select "Network Camera".
Note
• The video feed of the Network Camera to which you most recently connected is displayed.
• No video feed is displayed if no Network Cameras have been registered.
Closing Network Camera viewer
1. Press / HOME or / CANCEL , and then tap "OK".
Selecting a Network Camera
1. In standby mode, tap or , and then select "Network Camera".
2. Press / MENU .
3. Tap "Camera Selection".
4. Tap or : Select the desired camera name, and then tap "OK".
Controlling a Network Camera
[While displaying a video feed from a Network Camera (operation screen)]
Centering: While the status bar and operation area are displayed on the screen, tap the spot where you
want to center the video feed.
*1
Perform the following steps to pan, tilt, zoom in/out, or move to the camera's home position.
1. Tap the screen to display the icons before performing the following operations.
2. Do one of the following.
a. To pan, tap
or .
b. To tilt, tap or .
c. To zoom in, tap .
d. To zoom out, tap
.
e. To move to the camera's home position, tap .
*1
Depending on the Network Camera, this feature may not be available.
3.10.2 Network Camera Viewer
82 Operating Instructions Document Version: 2017-08
To Next Page
Loading...
