• To enter a character located on the same dialing key as the previous character, move the cursor by
tapping , then enter the desired character.
• If you enter a different character by mistake, tap or to highlight the character, tap to delete it,
then enter the correct character.
• To clear an entire line, tap "Delete".
2.7.4 Using the Incoming/Outgoing Call Log
Displaying the Incoming Call Log
1. In standby mode, tap or , and then select "Call History".
2. Tap (Incoming Call Log).
3. Tap (Missed Call Log).
Displaying the Outgoing Call Log
1. In standby mode, tap
or , and then select "Call History".
2. Tap .
Deleting Items in the Incoming/Outgoing Call Log
[When the Incoming or Outgoing Call Log is displayed]
1. Tap
.
2. Tap or , and then tap the check boxes of the items you want to delete.
3. Tap , and then tap "OK" .
Note
• You can select all items in the list by tapping .
2.7.4 Using the Incoming/Outgoing Call Log
Document Version: 2017-08 Operating Instructions 53
To Next Page
Loading...
