4.4 Function Keys (Program Keys and DSS Keys)
4.4.1 Program Keys
Tapping "Function" displays the function keys. 8 keys are displayed on one page.
Note
• Example images of the display in this manual are samples only, and the actual screen on your phone
may vary in language and/or appearance.
Page selection
There are 3 pages (screens) of function keys. Tapping the number displays that page. If the status of
a function key that is not displayed changes, the page number for that key will blink.
Function key layout
• Page 1: Function keys 1–8
• Page 2: Function keys 9–16
• Page 3: Function keys 17–24
The function keys are arranged vertically, starting at the top left.
4.4.2 Changing the Function Keys
1. In standby mode, tap or , and then select "Basic Settings".
2. Tap or , and then select "Key Option".
3. Tap "Program Key".
*1
4. Tap or , and then select the key to change.
5. Tap "Function".
6. Tap or , and then select the new item to assign.
*2
7. Tap "OK".
• Specify additional settings, such as "Line", "Label" and "Phone Number" as necessary.
8. Tap .
*1
To assign functions to the DSS keys on a KX-HDV20, tap "DSS Key".
You can also assign a function by pressing the desired DSS key for 3 or more seconds.
*2
To clear the current setting, tap "None".
4.4.3 The Types of Function Keys
Each of the function keys can be assigned one of the following functions.
4.4 Function Keys (Program Keys and DSS Keys)
96 Operating Instructions Document Version: 2017-08
To Next Page
Loading...
