Panasonic KX-HDV430

Note
• In addition to the Line function, other functions can be assigned to individual lines. However, only
lines that have been set up in advance can be selected.
• If your phone is connected to a Panasonic KX-HTS series PBX, the method for changing these keys
and the functions that can be assigned are different.
For details, see the documentation for the KX-HTS series PBX.
1. One Touch Dial
Used to dial a previously set phone number with one touch.
The type of call that is established depends on the Call Mode setting (KX-HDV430 only).
2. BLF (Busy Lamp Field)
Used to transfer calls to the extension assigned to the key while receiving an incoming call or during a
conversation. The indicator of a BLF key also shows the current status of the extension assigned to the
key.
Status
Meaning
Color Light pattern
Red Off Available
On Unavailable
Quick Flashing Ringing
Blue On Call Park
Note
• More than 48 BLF keys can be programmed, but status indication is available only up to 48 keys.
3. Line
Used to seize a line in order to make or receive a call. The color of each key’s indicator shows the
status of the line.
Status
Meaning
Color Light pattern
Blue On In Use
• You are on a call.
Slow Flashing Line On Hold
• A call is on hold.
Quick Flashing Incoming Call or Recall
• A call (including Hold Recall) is being received.
Name or number of caller
• A call to a shared line is being received.
Red On In Use
• A shared line is in use or a call is on private hold at
another unit.
Slow Flashing Line On Hold
• A shared line is on hold at another unit.
4.4.3 The Types of Function Keys
Document Version: 2017-08 Operating Instructions 97