Note
• If an icon is grayed out, that feature is not available.
Switching Automatically among Multiple Network Cameras
You can automatically cycle through the video feeds from registered Network Cameras at a set time interval.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press / MENU .
2. Tap "Camera Selection".
3. Tap "Sequential".
To stop switching
1. While switching, press
/ MENU .
2. Tap "Camera Selection".
3. Tap any camera name.
Note
• The order in which video feeds are displayed follows the order in which the Network Cameras are
registered.
Interval switching settings
[While displaying a video feed from a Network Camera (operation screen)]
1. Press / MENU .
2. Tap "Camera Selection".
3. Press / MENU .
4. Tap "Sequential Interval".
5. Tap or : Select the desired item, and then tap "OK".
3.10.3 Using Phone Numbers Associated with a Network Camera
Paging Number
Paging can be performed using a phone number (Paging Number) associated with a Network Camera.
[While displaying a video feed from a Network Camera (operation screen)]
1. Tap the screen.
2. Tap
.
Note
• A call is a voice call using the speakerphone from the default line.
Linked Number
The video feed of the Network Camera can be viewed by making or receiving a call using a phone number
(Linked Number) associated with the Network Camera.
3.10.3 Using Phone Numbers Associated with a Network Camera
Document Version: 2017-08 Operating Instructions 83
To Next Page
Loading...
