Panasonic KX-HDV430

2.2.2 Adjusting the Stand Position
Push the PUSH marks in the direction indicated, with both hands, and tilt and slide the stand until it
becomes fixed in the desired position.
• Lowering the stand • Raising the stand
PUSH
PUSH
PUSH
PUSH
2.2.3 Removing the Stand
Tilt the stand in the direction indicated while pushing the PUSH marks with both hands.
PUSH
PUSH
2.2.4 Adjusting the Camera Angle (KX-HDV430 only)
You can tilt the camera's angle by turning the wheel on the back of the camera.
↑ : Tilt the camera upward.
↓ : Tilt the camera downward.
Note
If the camera is not being used, the lens can be hidden by turning the wheel to the top.
2.2.2 Adjusting the Stand Position
Document Version: 2017-08 Operating Instructions 19