Panasonic KX-HDV430

Making a call
1. In standby mode, dial the Linked Number.
2. Tap "Voice Call".
The video feed of the Network Camera associated with the Linked Number is displayed.
Receiving a call
1. While receiving a call, tap "Voice Call".
If the call received was made using a Linked Number, the video feed of the associated Network Camera
is displayed.
3.10.4 Network Camera Presets
You can select a viewing position that has been registered in the Network Camera's settings beforehand.
These registered viewing positions are called "presets".
Note
• Depending on the Network Camera, this feature may not be available.
Adding a Preset
[While displaying a video feed from a Network Camera (operation screen)]
1. Press / MENU .
2. Tap "Preset".
3. Tap or , and then select the desired item.
4. Tap "OK".
Displays the selected position image.
5. To return to the preset selection screen, tap .
To return to the operation screen, tap "OK".
Note
• Tapping in step 3 displays the camera's position before a preset was selected.
Adding a Preset to Your Favorites
You can register a preset to your favorites.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press
/ MENU .
2. Tap "Preset".
3. Tap or , and then select the preset you want to register.
4. Tap "Edit".
5. Tap "Add to Favourites/Favorites", and then tap "OK".
Deleting a Preset from Your Favorites
[While displaying a video feed from a Network Camera (operation screen)]
1. Press / MENU .
2. Tap "Preset".
3.10.4 Network Camera Presets
84 Operating Instructions Document Version: 2017-08