Panasonic KX-HDV430

Switching from a Voice Conference Call to a Video Conference Call (KX-HDV430
only)
1. During a voice conference call, tap "Video Call".
Removing a Party from the Conference
During a conference, you can remove other parties from the conference. However, this operation is
available only during conference calls you initiate.
1. During a conference call, press / / HOLD .
2. Press
/ / HOLD again to show the conference parties on hold.
3. Tap or , and select the party to remove.
4. Talk to the party and go on-hook to end the call.
5. Press / / HOLD .
Ending a Conference Call
To end the conference call, go on-hook.
3.4.6 Muting the Microphone or the Handset
You can disable the microphone or the handset to consult privately with others in the room while listening to
the other party on the phone through the speaker or the handset.
To set/cancel
1. Press
/ MUTE/AUTO ANS .
Note
• When the icon is displayed in the status bar, Mute is on.
• During Mute, even if you switch from/to speakerphone, Mute will continue.
• During Mute, even if you connect/disconnect a headset, Mute will continue.
3.4.7 Using Call Waiting
During a conversation, if a second call arrives, you will hear a call waiting tone. You can answer the second
call by disconnecting or holding the current call. If the call waiting screen is displayed, you can switch to the
line display or combined display
*1
by pressing / HOME or by waiting 10 seconds. You can return to the
original screen again by pressing / HOME . This is an optional telephone company service. You can
receive a call waiting tone and the caller's information. For details, contact your phone system dealer/service
provider.
*1
The combined display is displayed if it is set as the standby screen.
To disconnect the current call and then talk to the new party
1. Go on-hook.
2. Go off-hook.
To hold the current call and then talk to the new party
1. Do one of the following:
3.4.6 Muting the Microphone or the Handset
66 Operating Instructions Document Version: 2017-08