Panasonic KX-HDV430

3.1 Making Calls
This section explains the basic methods for making a call.
• You can confirm that the number was dialed correctly before calling (Predialing) by entering the number,
then going off-hook.
• To cancel dialing, press
/ CANCEL .
• To insert a 3 second pause between phone numbers, tap "Pause".
*1
It is useful when you want to operate voice mail service without listening to pre-recorded announcement,
for example. Repeat as needed to create longer pauses.
• The "+" symbol (international dialing code) can be entered by pressing and holding the key.
• You can select whether to make a voice call or a video call. If you make a call by going off-hook, the type
of call that is established depends on the "Call Mode" setting (KX-HDV430 only).
*1
This icon is displayed only when configured on the telephone. Contact your administrator for further information.
3.1.1 Basic Calling
Calling by Dialing
1. In standby mode, go off-hook.
2. Dial the outside party’s number.
3. Do one of the following:
a. Tap "Voice Call" to make a voice call.
b. Tap "Video Call" to make a video call (KX-HDV430 only).
4. Go on-hook to end the call.
Note
• You can use a specific line by pressing a function key assigned to a line (see "4.4.3 The Types of
Function Keys") or by using the Line Status screen (see "3.8 Checking the Line Status").
• To dial a new number without going on-hook, follow the procedure below.
1. During a conversation, press / MENU .
2. Tap "Flash/Recall".
Predialing
In standby mode, you can start dialing while still on-hook. After dialing the number, go off-hook to begin the
call.
1. In standby mode, dial while still on-hook.
2. Do one of the following:
a. Go off-hook.
*1
b. Tap "Voice Call" to make a voice call.
c. Tap "Video Call" to make a video call (KX-HDV430 only).
*1
The type of call that is established depends on the "Call Mode" setting (KX-HDV430 only).
3.1 Making Calls
56 Operating Instructions Document Version: 2017-08