Panasonic KX-NCP500 - Page 987

1.29.1 Dial Tone
Dial Tone Transfer
• 6.5 [4-1-4] Wired Extension—Flexible Button
–
Type
– Parameter Selection (for TRS Level Change)
• 6.13 [4-2-3] Portable Station—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
• 6.17 [4-3] DSS Console
–
Type
– Parameter Selection (for TRS Level Change)
Feature Guide References
1.9.4 Dial Tone Transfer
Dial Type Selection
• 3.30 [1-1] Slot—Port Property - LCO Port
– Dialling Mode
– DTMF Width
– Pulse Speed
• 3.38 [1-1] Slot—Port Property - T1 Port
–
CO Dial Mode
– DTMF Width
– CO Pulse Speed
• 3.44 [1-1] Slot—Port Property - E1 Port
– CO Dial Mode
– DTMF Width
– CO Pulse Speed
• 3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)
– Dialling Mode
– DTMF Width
– CO Pulse Speed
• 3.50 [1-1] Slot—Port Property - DID Port (KX-TDE series only)
–
Dialling Mode
– DTMF Width
– CO Pulse Speed
Feature Guide References
1.5.4.4 Dial Type Selection
Direct In Line (DIL)
• 12.2 [10-2] DIL Table & Port Settings—DIL
– DIL Destination—Day, Lunch, Break, Night
– Tenant Number
– VM Trunk Group No.
Feature Guide References
1.1.1.2 Direct In Line (DIL)
PC Programming Manual 987
Feature Programming References