Direct Inward Dialling (DID)/Direct Dialling In (DDI)
• 3.49 [1-1] Slot—Card Property - DID type (KX-TDE series only)
• 4.5 [2-3] Timers & Counters—Miscellaneous
—
Incoming Call Inter-digit Timer—DDI / DID
• 12.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
– Distribution Method
– DDI/DID/TIE/MSN—Remove Digit
– DDI/DID/TIE/MSN—Additional Dial
• 12.3 [10-3] DDI / DID Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
• 4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
–
DISA—Delayed Answer Timer
– DISA—Mute & OGM Start Timer after answering
– DISA—No Dial Intercept Timer
– DISA—2nd Dial Timer for AA
– DISA—Intercept Timer—Day, Lunch, Break, Night
– DISA—Disconnect Timer after Intercept
– DISA—CO-to-CO Call Prolong Counter
– DISA—CO-to-CO Call Prolong Time
– DISA—Progress Tone Continuation Time before Recording Message
– DISA—Reorder Tone Duration
• 4.5 [2-3] Timers & Counters—Miscellaneous
—
Extension PIN—Lock Counter
• 4.12 [2-7-1] Class of Service—COS Settings—Optional Device
& Other Extensions—
Accept the Call
from DISA
• 5.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
– DISA Tone Detection—Silence
– DISA Tone Detection—Continuous
– DISA Tone Detection—Cyclic
• 6.1
[4-1-1] Wired Extension—Extension Settings—Intercept Destination—
Intercept Destination—
When
called party does not answer—Day, Lunch, Break, Night
• 6.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination—
Intercept Destination—
When called party does not answer
—Day, Lunch, Break, Night
• 7.3 [5-3-1] Voice Message—DISA System
• 7.4 [5-3-2] Voice Message—DISA Message
Feature Guide References
1.17.6 Direct Inward System Access (DISA)
Display Information
• 4.18 [2-9] System Options—Option 5—
PT Feature Access—No. 1–8
• 6.1 [4-1-1] Wired Extension—Extension Settings
—Option 5
–
Display Language
– Incoming Call Display
– Automatic LCD Switch when Start Talking
• 6.10 [4-2-1] Portable Station—Extension Settings
—Option 5
–
Display Language
– Incoming Call Display
988 PC Programming Manual
Feature Programming References
To Next Page
Loading...
