Panasonic KX-TA624 - Hold Recall Time; Transfer Recall Time

4-26 System Programming
[200]-[201] 4.2 System Programming
Assigns the length of the hold recall timer. Hold recall (a ring tone or an alarm tone) is
heard when the timer expires. If hold recall is not required, select “Disable”.
Default 30 seconds
• Feature References
Section 3, Features
Call Park, Hold
[200] Hold Recall Time
0
0
2
(30 sec/
1/1.5/2/3/4/5/6 min/
Disable)
NEXT
SELECT
STORE
END
Assigns the length of the transfer recall timer. If a transferred call is not answered within the
programmed time, the call will be returned to the original caller.
Default 30 seconds
• Feature Reference
Section 3, Features
Call Transfer – to Extension
[201] Transfer Recall Time
1
0
2
NEXT
SELECT
STORE
END
(15/30 sec/
1/2 min)
☞
☞
PSQX1708ZA-08E.QX 99.10.15 1:01 PM Page 26