Panasonic KX-TA624 - SMDR Account Code Selection

*
1
Exchange line number: 1 through 6 / (All exchange lines)
*
2
Extension port number: 01 through 24 / (All extension ports)
*
3
DSS console number: 1 through 2 / (Both DSS console numbers)
• This program and [999] “System Data Clear” are not included.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
System Programming 4-85
4.2 System Programming [804]-[805]
Selects printing out the account code stored in program [310] “Account Codes”, or just the
index of the account code on SMDR printout.
Default CODE
• The printing of the index of the account code only occurs if the extension user entered their
account code in the “Verify-All” or “Verify-Toll (Call Barring)” input mode as programmed
in [605] “Account Code Entry Mode”.
• Feature References
Section 3, Features
Account Code Entry, Station Message Detail Recording (SMDR)
[805] SMDR Account Code Selection
5
0
8
NEXT
SELECT
(CODE/
INDEX)
STORE
END
NEXT
STORE
SELECT
< To select the Extension parameter. >
END
To continue
STORE
NEXT
STORE
SELECT
< To select the DSS parameter. >
END
STORE
DSS console no.*
3
(1···2/ )
extension port no.*
2
(01 ··· 24/ )
To continue
4
0
8
4
0
8
(All/System/CO/Ext/
DSS Para/Speed Dial/
Stop Output)
(All/System/CO/Ext/
DSS Para/Speed Dial/
Stop Output)
!
!
NEXT
STORE
SELECT
< To select the CO (exchange line) parameter. >
END
exchange line
(1 ··· 6/ )
To continue
STORE
4
0
8
(All/System/CO/Ext/
DSS Para/Speed Dial/
Stop Output)
☞
☞
!
!
PSQX1708ZA-12E.QX 99.10.15 1:09 PM Page 85