Panasonic KX-TA624 - Securing the Cords; Closing the Front Cover

Installation 2-31
2.19 Securing the Cords
2.20 Closing the Front Cover
1. Replace the covers and tighten the screws.
2. Tie together all of the connected cords and attach them to the wall so that the cords
cannot be pulled out of the system.
1. Wrap the strap around all of the cords.
• To remove the rivet, use a screw driver as shown below.
Rivet
!
!
PSQX1708ZA-03E.QX 99.10.15 5:46 PM Page 31