1.6 Before Leaving Your Desk
1-54 Operations
• Up to 32 digits (including the line access code) can be programmed.
• In the account code verify-all and forced modes, an account code must be stored by pressing
“ ” and entering the account code after the line access code (“ ” is not regarded as a
pause).
!
!
PT and SLT
Busy or No Answer
You can forward your calls to another extension when your extension is busy or if you do not
answer the call within a pre-determined time.
Setting
• 1.2 Proprietary Telephone Settings, “Customising Your Telephone Functions”,
Intercom Alert Assignment
Lift the handset
or press
SP-PHONE/MONITOR.
For a PT: Press FWD/DND.
For an SLT: Dial 71.
Hang up or press
SP-PHONE/MONITOR.
Confirmation
tone and
dial tone
Dial 2. Enter the destination
extension number.
Dial #.
2
For an SLT
For a PT
17
FWD/DND
extension no.
#
• You may press the flexible line key
assigned as the FWD/DND button
instead.
• The FWD/DND indicator light flashes red slowly.
• Single line telephone users can dial “0” instead of
“#”.
PT and SLT
• The FWD/DND indicator light flashes red slowly.
To Exchange Line
You can forward intercom calls to an external party.
System Programming is required to execute this feature.
Setting
For a PT: Press
FWD/DND.
For an SLT: Dial 71.
Enter the line
access code
(9, 0 or 81
through 86).
Enter the
phone number.
Dial #.
7 1
For an SLT
For a PT
Dial 3.
line access code phone no.
3
Lift the handset
or press
SP-PHONE/MONITOR
.
Hang up or press
SP-PHONE/MONITOR
.
Confirmation
tone and
dial tone
FWD/DND
#
☞
PSQX1709ZA-05.QX 99.10.15 9:58 AM Page 54
To Next Page
Loading...
