Panasonic KX-TA624 - Internal Pulse Detection

4-76 System Programming
[614] 4.2 System Programming
Enables or disables connecting a single line telephone (SLT) to receive pulse signals for each
extension.
* Extension port number: 01 through 24 / (All extension ports)
Default All extension ports – Enable
• If you select “MODE 1” in program [207] “Recall Timing Range Selection” and “Enable”
in this program, the system will distinguish between a pulse signal and hooking depending
on the situation. When you select “Disable” in this program, if “1” is dialled during the
pulse mode, the system will regard it as hooking and all other numbers will be disregarded.
• Feature Reference
Section 3, Features
Recall Button on a Single Line Telephone
4
1
6
[614] Internal Pulse Detection
NEXT
END
extension port no.*
SELECT
(Enable/
Disable)
(01 ··· 24/ )
!
!
☞
SELECT
NEXT
PREV
or
To continue
To continue
STORE
PSQX1708ZA-11E.QX 99.10.15 1:07 PM Page 76