1.9 DSS Console Features
Operations 1-101
Operator / Manager
/ DSS Console Operations
• DSS buttons can be changed to any of the following function buttons.
a) Another DSS Button (Every DSS button can be assigned to another extension number.)
b) One-Touch Dialling Button
c) Day Button (Operator/Manager only)
d) Night Button (Operator/Manager only)
e) Lunch Button (Operator/Manager only)
f) Extension Lock Button (Operator/Manager only)
• PF buttons can be changed to One-Touch Dialling buttons.
• When the STORE button is pressed after programming, you will hear beep tones as follows.
— 1 beep: The entry is different from the one that was stored previously.
— 2 beeps: The entry is the same as the previously stored one.
• You can check the stored data in the following way.
1. Set the MEMORY switch to “PROGRAM”.
2. Press the desired button while on-hook.
The data will be displayed. After checking the data return the MEMORY switch to the
“SET” position.
• 1.2 Proprietary Telephone Settings, “Customising the Buttons on Your Telephone”,
DSS Button,
One-Touch Dialling Button
!
!
☞
An extension can be called and accessed by simply pressing a DSS button. The BLF shows if
the extension is engaged.
PT and DSS Console
Press the desired DSS button.
[DSS Console]
Lift the handset or press
SP-PHONE/MONITOR.
[Paired Telephone]
PT and DSS Console
Press the desired DSS or PF button.
[DSS Console]
Lift the handset or press
SP-PHONE/MONITOR.
[Paired Telephone]
The stored number is dialled automatically by pressing a programmed DSS or PF button.
One-Touch Dialling
Direct Extension Dialling
• By System Programming you can press a DSS button directly to make an intercom call
without going off-hook.
!
!
PSQX1709ZA-07.QX 99.10.15 9:59 AM Page 101
To Next Page
Loading...
