1.2 System Features
Installation 1-7
Station Message Detail Recording (SMDR) with the Caller ID Card
When the Caller ID Card is installed, a received caller’s telephone number (maximum 16
digits) will be printed out after <incoming> or <DISA incoming> as shown below, if the
calling party has enabled Caller ID service. Refer to the Installation Manual, Section 3
Features, “Station Message Detail Recording (SMDR)” for more information about SMDR.
• A received caller’s telephone number will be printed out only when “With CID” is
selected in program [906] “Caller ID SMDR Format”.
• Related Feature References
Installation Manual, Section 3 Features
Station Message Detail Recording (SMDR)
☞
An example of a printed call record:
Date Time Ext. CO Dial number Duration Code
31/12/98 12:52PM 203 05 12345678901234567890123456789012 00:00'16 ....
31/12/98 12:53PM 203 02 < incoming >2013570846
00:01'43 ....
31/12/98 *12:54PM 201 02 < incoming >1234567890123456
00:07'48 ....
31/12/98 1:04PM 203 06 092...1438 00:00'06 4536
31/12/98 1:04PM 202 05 < DISA incoming >2013570846
00:00'09 ....
31/12/98 1:05PM 203 01 < DISA incoming > 00:00'08 ....
31/12/98 1:06PM 203 01 092123456789 00:00'08 ....
31/12/98 1:06PM 202 02 0921234567 00:00'17 ....
31/12/98 1:07PM 203 01 0921234567 00:11'00 ..13
31/12/98 2:15PM 203 01 0921234567 00:11'00 .201
31/12/98 2:26PM 203 01 F/0927654321 00:03'00 ....
31/12/98 2:27PM 216 05 9=0924567123 00:13'55 ....
31/12/98 3:25PM 02 < UCD Waiting > 00:11'48 ....
!
!
PSQX1744ZA-1(E).QX 99.10.15 9:45 AM Page 7
To Next Page
Loading...
