1.1 Caller ID Card Installation
Installation 1-3
7. Insert the flat cable to the connector.
8. Close the cover.
6. Attach the Caller ID Card.
Caller ID Card
(for exchange lines 1 – 3)
Note
Please do not damage this part.
Install the Caller ID Card
(for exchange lines 4 – 6) here.
• Be sure the frame of the main unit is connected to the ground (☞ Installation Manual,
2.5 “Frame Ground Connection”).
!
!
PSQX1744ZA-1(E).QX 99.10.15 9:45 AM Page 3
To Next Page
Loading...
