1-6 Operations
1.2 Proprietary Telephone Settings
PROGRAMMING INPUT
3
Enter the exchange line
numbers you want to ring
(1 through 6).
exchange line no.
AUTO DIAL
STORE
Exchange Line Ringing Selection
You can select whether the extension will ring or not when an outside call is received at your
extension.
• The “Flexible Ringing Assignment” should be set to “Enable”. (See the Installation
Manual.)
• When an outside call is received at your extension but does not ring, the line key will flash.
If you want to answer the outside call, press the flashing line key.
!
!
❑ Ringing Line Preference.
Preferred Line Assignment — Incoming
No Line Preference: When an incoming outside call is received, the extension user
must go off-hook and then press the flashing line key.
Prime Line Preference: When incoming exchange line calls are received at the same time,
you can receive the call on the preferred exchange line first only
by going off-hook.
Ringing Line Preference: When an incoming outside call is received, you can receive the
(default) call ringing at your telephone by going off-hook.
SELECTION PROGRAMMING INPUT
❑ No Line Preference.
❑ Prime Line Preference.
• Setting a new line preference feature will cancel the previous setting.
• In “Prime Line Preference” mode, if incoming exchange line calls are received at the same
time except for the preferred exchange line, you must go off-hook and then press the line
key whose indicator is flashing red quickly.
2 3
Enter the exchange line
number (1 through 6).
exchange line no.
AUTO DIAL
STORE
!
!
PSQX1709ZA-02.QX 99.10.15 9:55 AM Page 6
To Next Page
Loading...
