Panasonic KX-TD500 - Page 129

User Programming
User Manual 129
Canceling
Conditions
• The number of the CO buttons available for each PT varies depending on the telephone type
<Section 1.16 Button Features, "Buttons on Proprietary Telephones and DSS Consoles" in
the Features Guide>.
To program 24 CO buttons, use the proprietary telephone with 24 CO buttons, such as KX-
T7230.
• If you press the same CO button again at step 5, you can select a desired ringer frequency
for the CO button from eight types of ring tones. When you enter the tone type number (1
through 8), you will hear the selected tone type until STORE is pressed. This selection is
possible only for the CO buttons that have been assigned to Single-CO, Group-CO, Loop-
CO, PDN or SDN.
Display PT
Dial 005. Enter an extension number
(3 or 4 digits).
extension no.
Press NEXT.
<PT Display>
005 FLEXIBLE CO
<PT Display>
EXT NO? →
To enter the lowest extension
number, you can also press
NEXT.
<PT Display>
PT-PGM Mode
The display shows the contents
pre-assigned to the button.
<PT Display Example>
CO-10101
Press END.
END
Press STORE.
STORE
Dial 2.
2
Press CO which is changed
to another button.
CO
0 0 5
NEXT