Panasonic KX-TD500 - Page 144

User Programming
144 User Manual
Programming
Conditions
• The KX-TD500 System can store up to 32 programmable DISA user codes with a COS
level for each. Each code should be unique.
User Manual References
• 4.3.26 Direct Inward System Access (DISA)
Display PT
Dial 010. Enter a location number
(01 through 32).
location no.
<To end:>
Press NEXT.
NEXT
<PT Display> <PT Display>
Location NO?→
To enter location number 1, you
can also press NEXT.
<PT Display Example>
1:Not Stored
Press END.
END
<To continue:> [When SELECT is pressed]
Repeat these steps
Enter a COS number
(1 through 96).
Enter a DISA
User Code.
COS no.DISA User Code
Press STORE.
Press NEXT or
PREV or SELECT.
Enter the desired
location number
(01 through 32).
location no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new number.
010
010 DISA CODES
NEXT
PREV
SELECT
STORE
Press →.