Station Features and Operation (PT/SLT)
188 User Manual
• While setting, you can temporarily cancel this feature by pressing the Group FWD button.
Pressing the Group FWD button alternates between setting and canceling the mode.
The lighting patterns of the Group FWD button are as follows:
Off: This feature is not set.
Red on: Group FWD mode
• The Group FWD button cannot be used to store or cancel this feature.
Please use the feature number for "Group FWD" instead.
Programming Guide References
• 2.3 Numbering Plan
– Group FWD
• 2.4 Class of Service (COS)
– Incoming Group FWD
• 2.8 System Option
– Special dial tone after setting feature
– Confirmation tone for Call Pickup, Paging, Paging – Answer, TAFAS – Answer,
Hold Retrieve and Call Park Retrieve
• 4.3 Extension Line
– CO Key
• 4.4 DSS Console
– DSS Key
Features Guide References
1.11 Transferring Features
• Call Forwarding—All Calls to an Incoming Group
User Manual References
• 2.2.3 Flexible Button Assignment
• 3.2.5 [005] Flexible CO Button Assignment
FWD OFF
To Next Page
Loading...
